all

1 block, size 2" x 5" x 5"Choose between African Mahogany (Khaya), Maple and Sitka Spruce, Yellow Cedar.Quartersawn within 40 degrees (riftsawn).Ro...

One piece - Fretwire for Mandolins, Banjos, & Ukuleles.Highest quality of Nickel-silver with HV-175 Hardness.Length 500mm (19.75") -- Width: 1....

1 piece, size: 0.5 x 1.9"x 7.5" (1.3cm x 4.8cm x 19cm) approximately.Kiln dried, currently at 10% moisture content.Natural. Please note that we can...

Blue Veneer, size: 0.02" thick x 3.9" wide x 33" long (0.5mm thick x 100mm wide x 850mm long)

This handy little Palm Sander lets you use your 2" hook-and-loop sanding discs for hand sanding as well as power sanding. Made of sturdy foam with ...

Clamp Block for Oneway These Oneway Clamp Blocks are designed to adapt a range of accessories to lathe beds including the Oneway Bowl Steady, Spind...

Acrylic Pearloid round position markers, 10 piece pack.Size, each: 2mm thick x 2mm round.Premium quality.Made in Japan

One piece - Medium fretwire, great replacement for Martin® and Yamaha® guitars. Highest quality of Nickel-silver with HV-175 Hardness. Length 500mm...

6 Slotted Ebony Bridge Pins.

Set of 2 pre-bent Red / White Herringbone Purfling. Select from Folk, Classical and Dreadnought sizes. * Note * Dimensions may vary, as these item...

Oneway 17.5" Comfort Grip handle, with 1/2" and 5/8 nose Made in Canada.

Size: 0.2" x 4" x 8", your choice of wood. Kiln dried, currently at 10% moisture content. Roughsawn, Natural.

Pro-PM turning tools are the "elite" of all turning chisels.  Made from an advanced Particle Metal, the molten steel has been compressed and sinter...

1 piece, size: 0.15" x 8" x 8" Choice of Sitka, Engelmann, Cedar, or Cypress Quatrtersawn within 20 degrees. Roughsawn. Air dried, well aged (over...

3 piece set Rosette for Classical Guitars -- 0.07" (0.178mm) thick Herringbone. Inner ring is 0.081" (2.06mm) wide, 3.94" (100mm) diameter. Outer r...

1 piece - Bone Saddle for Acoustic Guitars. 85 x 2.5 x 10 mm (3.346" x 0.098" x 0.393"). High Quality, Made in Japan.

This Pro Wheel System mobility kit is designed for use with the Laguna  14|Twelve and 14|BX band saws (sold separately).The unit provides great sta...

** CANNOT BE SHIPPED TO USA ** 10 piece pack. size (each): 9.5mm x 5mm x 1.5mm. Premium quality Mother of Pearl.

1 Ebony End Pin with 3mm Mother of Pearl Dot.High Quality, Made in Japan.

Acrylic Black round position markers, 10 piece pack.Size, each: 2mm thick x 6mm round. Premium quality.

Thread-Lok FerrulesUse these great innovative new ferrules to make your own turning tools!These ingeniously designed ferrules allow you to use your...

English size is 1/2 across flutes. 5/8 is diameter of steel. Pro-PM turning tools are the "elite" of all turning chisels. Made fr...

Quick, Accurate and Easy to use. Produce and maintain prefect fingernail, side grind and profiles on spindle and bowl gouges. Side restrained actio...

THIS ITEM IS EXPORT RESTRICTED AND CANNOT BE SHIPPED OUTSIDE OF CANADA Indian Rosewood (dalbergia latifolia).Size: 6"x 6" x 3" (15.24cm x 15.24cm...

1 Indian Ebony (diospyros ebenum) spindle.Size: 1" x 1" x 18" ( 0.13")Without structural defects.The pieces may have one or two small knots, or col...

1 Indian Ebony (diospyros ebenum) piece.High grade; uniform colour, straight grain, and free of any defects. Kiln dried, currently at 10% moisture ...

1 pack of 24 pieces piece - Medium Standard fretwire, made of highest quality nickel-silver, with a hardness of HV-175 and a 300mm radius, as used ...

Robust Low Profile Rests are for spindle turners that like to wrap their hand around the tool rest. They are also your choice for smaller lathes. L...

The Oneway 11.5" Multi-Purpose Curved Toolrest can be used for a variety of applications due to the variation of the curve. Turning the inside of b...

6 Slotted Buffalo Horn Bridge Pins with 2mm Mother of Pearl dots. High Quality, Made in Japan.

6 Slotted Bone Bridge Pins with 3mm Mother of Pearl dot. High Quality, Made in Japan.

Precut Stainless steel Fretwire Each fret of the following precut stainless steel fretwire is cut based on a standard fretboard (43mm at nut / 53mm...

3 piece set Rosette for Dreadnought Guitars -- 0.07" (0.178mm) thick Herringbone. Inner ring is 0.081" (2.06mm) wide, 4.72" (120mm) diameter . Oute...

Product Details The Stallion CWI-B1413 14” 1.5HP Band Saw has been designed with big features and lots of capacity but at a value that any woodwork...

1 Big Leaf Maple (acer macrophyllum) fingerboard.Size:  21.5" x 3" x .25" (54.5cm x 7.6cm x 6.3mm) Minimum.  Thickness planed top and back.Kiln dri...

1 piece, size: 0.14" x 2.3" x 8.7" minimum size. Sizes may vary.Kiln dried, currently at 10% moisture content. Natural.

1 piece - Bleached Bone Nut for Strat type Electric Guitars. 44 x 6 x 3.2 mm (1.73" x 0.23" x 0.125"). High Quality, Made in Japan.

1 Indian Ebony (diospyros ebenum) piece. Standard grade may have some streaking, coloration, or irregular grain, but will be free of defects such a...

One piece - Nickel-silver (Hardness HV-175) Fretwire. Length 600mm (23.62") -- Width: 2.7mm (0.106") -- Crown: 1mm (0.039") High quality, made in ...

Clapham's Cutting & Sanding Compound was formulated for professional and hobbyist woodturners.Reduces wood dust while turning (spray the wood w...

The Trent Bosch Total Access Hollowing Tools are simply the best hollowing tools available. Let us tell you why: Designed by a woodturner for woodt...